Serving the Salem area  ·  (971) 273-5957  ·  Open Mon-Sun 7am-7pm
📞 (971) 273-5957 Free Quote

Metal Roofing in Amity, OR (97101) · Local Professionals

Salem Metal Roofing · Fast response in Amity and the Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+274Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Amity sits at the heart of Oregon wine country, a small town where the pace slows down and the roofs have to keep up with real weather. The mix here is unmistakable: older farmhouses and barns out along the valley floor, newer vineyard estates tucked into the Eola Hills, and modest in-town homes along Trade Street and Highway 99W that see their share of moss, fir needles, and winter wind. Lots tend to be generous, but access can be tight when you're working around mature oaks and narrow driveways.

Homeowners in Amity (97101) call Salem Metal Roofing because we understand this corner of Polk County. We know how standing seam performs on a west-facing barn, how stone-coated steel can match the look of an old farmhouse, and why a roof that sheds moss and fir needles matters more here than in the city. We're based in Salem, just a short drive up 99W, and we serve Amity and the surrounding areas with installation, repair, and replacement done right.

Metal Roofing in Amity (97101)

Amity is farm and vineyard country, and the roofing challenges follow from that. Out on the valley floor, you've got older barns and farmhouses with low-pitch roofs that have been patched a dozen times, plus newer homes and tasting rooms that want a clean standing seam look. In town, the lots are often lined with big shade trees, which means moss, algae, and a steady supply of leaves and fir needles. The ground can be soft in winter, so we plan staging and access carefully to avoid tearing up your yard. And when a roof sits under oaks and maples, we pay attention to flashing details around chimneys and skylights, because that's where leaks start.

Our team has worked across the Salem area and into Amity for years. We've installed standing seam on vineyard estates, replaced corrugated panels on hay barns, and repaired wind-lifted panels after a winter blow. We know the local building department requirements vary, so we always check with Polk County before we pull a permit for a full replacement. If you're in a historic or HOA area, we'll help you navigate design review so your new roof fits the neighborhood.

Our services in Amity

How a Job Works in Amity

Step 1: You call us at (971) 273-5957 or request a free estimate online. We'll set up a time to come out to your property in Amity, inspect the roof, and talk through what you're seeing. Whether it's a leak over the kitchen, a barn roof that's rusting through, or a full replacement on a ranch house, we'll give you a straight assessment and a written estimate.

Step 2: Once you approve, we schedule the work. In Amity, that often means planning around harvest season if you're on a vineyard, or coordinating with a tight driveway if you're in town. We handle the permit with the local building department and make sure any HOA or historic review is done before we order materials. On the day of, our crew protects your landscaping, sets up safely, and gets to work. We keep you posted on progress.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and walk the property with you to make sure you're satisfied. We don't leave until you've signed off and your questions are answered.

Pricing for metal roofing in Amity depends on the job. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam from $10, and replacement from $9. If you're retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits how many layers you can cover. Repairs start at $450, and screw replacement or re-fastening starts at $750. For farm and commercial buildings, we give free estimates because every barn is different. The main cost factors are roof size, pitch, access, condition of the existing roof, and how soon you need it done. We're happy to give you a free, no-pressure estimate at (971) 273-5957.

My barn roof in Amity is rusting through. Can you match the corrugated panels?
Yes. We install corrugated and ribbed panel roofing that matches most older barn profiles. We'll bring samples out to your property, measure the existing panels, and make sure the new metal fits the purlins and trim. For agricultural buildings, we also offer free estimates, so call us to set one up.
A storm just dropped a limb on my roof in Amity. How fast can you get here?
We prioritize storm and wind damage calls. Call us at (971) 273-5957 and we'll schedule a free inspection as soon as possible, usually within a day or two depending on the season. We can tarp active leaks and give you a written repair estimate on the spot.
What does a metal roof cost for a typical Amity ranch home?
For a 1,500 to 2,000 square foot ranch with a low-pitch roof, you're looking at roughly $12,000 to $20,000 for installation, depending on the panel type and access. Standing seam runs a bit higher. We give free estimates so you can get an exact number for your home.
Do I need a permit to replace my roof in Amity?
In most cases, yes. A full replacement or re-roof typically requires a permit from the local building department, and requirements can vary. We handle the permit application for you and make sure the work meets current code. If your home is in a historic district or HOA, we'll also help with any design review.
My neighbor's tree hangs over my roof. What are my options if I want a metal roof?
Overhanging branches can drop debris and cause moss, but a metal roof is a good choice because it sheds leaves and needles better than shingles. We can install a roof that handles the shade, and we'll also check flashing and gutters. If there's a property line issue, we recommend talking with your neighbor, and we can coordinate access if needed.
Are you insured for work on my Amity property?
Yes, we are fully insured, with general liability and workers' compensation coverage.
How often should I clean my metal roof in Amity?
Because of the big trees and wet winters here, we recommend checking your roof and gutters at least twice a year, in late fall after the leaves drop and in spring. Moss and algae can build up on shaded panels, and fir needles can clog gutters. A simple cleaning and inspection can prevent bigger problems.
Why choose us?

Trusted professionals in Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Salem

All your work handled by qualified professionals in Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

274+ Verified Client Reviews in Salem

⭐⭐⭐⭐⭐ 4.9/5 · 274 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Salem · Response within 24h · No commitment · ☎ (971) 273-5957

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm