Serving the Salem area  ·  (971) 273-5957  ·  Open Mon-Sun 7am-7pm
📞 (971) 273-5957 Free Quote

Metal Roofing in Silverton, OR (97373) · Local Professionals

Salem Metal Roofing · Fast response in Silverton and the Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+274Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Silverton's mix of Victorian-era homes near downtown, farm buildings out toward the Oregon Garden, and mid-century houses on quiet streets means roofs here face very different challenges block by block. From steep gables that shed fir needles slowly to low-slope ranch roofs that collect moss, the right metal roof system depends on the house, the trees, and the weather patterns we see in the Willamette Valley.

Homeowners in Silverton (97373) call Salem Metal Roofing because we understand local conditions: long wet winters, summer wildfire embers drifting from the Cascades, and the occasional windstorm that drops limbs. Whether you're near the Silverton Community Pool or out on a rural property, we provide honest assessments and metal roofing that holds up.

Metal Roofing in Silverton (97373)

Silverton's terrain ranges from flat lots near downtown to sloped properties in the hills toward Silver Falls. Older homes often have steep, complex rooflines with multiple valleys and dormers, which require careful flashing and panel layout. Farm buildings and barns need agricultural metal roofing that can handle large spans and resist condensation. The area's big Douglas firs and maples drop needles and leaves that trap moisture on roofs, especially on shaded north slopes. Moss and algae are common on older asphalt shingles, and metal roofing eliminates that problem while shedding debris better. We also see ice damming at eaves on higher-elevation homes and wind-lifted panels after storms. Our team has worked on everything from historic homes near the Silverton Friends Church to modern builds outside town, so we know how to match the right metal roof to your property's specific needs.

We've been serving Silverton and the surrounding Salem area for years, and we understand local permitting quirks, historic district considerations, and the importance of proper ventilation in our wet climate.

Our services in Silverton

How a Job Works in Silverton

Step 1: Call us at (971) 273-5957 or request a free estimate online. We'll schedule an on-site assessment at your Silverton property, inspect your current roof, discuss your options, and provide a written estimate. We'll also check for any permit requirements with the city.

Step 2: Once you approve the estimate, we schedule the work. For homes in tight downtown lots, we plan material delivery and staging carefully to avoid blocking neighbors. If your home is in a historic district or HOA, we coordinate color and profile approvals. We handle permits and inspections as needed, and we keep you informed on timing.

Step 3: After installation, we clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you're satisfied and that your gutters and downspouts are clear. We leave your property clean and your new metal roof ready for Oregon weather.

Metal roofing in Silverton is priced by square foot, and the final cost depends on roof size, access, condition, and the specific metal system you choose. For example, corrugated panel roofing starts around $5.50 per square foot, standing seam around $10, and copper or specialty metals around $20. Repairs like leak fixes start at $450, and screw replacement starts at $750. We also offer free estimates for inspections and storm damage. To get a realistic ballpark for your Silverton home, call us at (971) 273-5957. We'll assess your roof and give you a clear, no-pressure quote.

My Silverton home is near the Oregon Garden and has a lot of tree cover. Will a metal roof help with moss and debris?
Yes. Metal roofs shed fir needles and leaves much better than asphalt shingles, and they don't support moss growth the same way. However, debris can still accumulate in valleys and gutters, so we recommend regular gutter cleaning and sometimes installing leaf guards. For heavily shaded properties, standing seam with a smooth finish is a good choice because it resists algae and moss and is easy to clean.
A windstorm just lifted some panels on my barn outside Silverton. Can you handle emergency repairs?
We offer storm and wind damage repair with free inspections. Call us at (971) 273-5957, and we'll schedule a prompt assessment. We can secure or replace damaged panels, check fasteners, and make sure your building is watertight. We serve Silverton and surrounding rural areas, so we can get to you quickly after a storm.
What does a typical metal roof replacement cost for a ranch-style home in Silverton?
For a 1,500 to 2,000 square foot ranch with a low-slope roof, a metal roof replacement typically ranges from $9 to $14 per square foot installed, depending on the metal type and complexity. That means roughly $13,500 to $28,000. Access, roof pitch, and whether we need to remove existing layers affect the price. We provide free estimates so you can get an accurate number for your specific home.
Do I need a permit to replace my roof in Silverton, and how do I get one?
Yes, roofing permits are generally required for a full replacement in Silverton. The city follows Oregon building codes, and requirements vary by project scope. We handle the permitting process for you, including submitting plans and coordinating inspections. We'll verify current rules with the Silverton building department to ensure compliance.
My neighbor and I share a property line, and I'm worried about roof runoff. How do you handle drainage and property line issues?
We design gutter and downspout systems to direct water away from your foundation and avoid causing issues for neighbors. If your roof runoff currently flows onto a neighbor's property, we can adjust downspouts or install extensions. For property line concerns, we recommend checking your plat or survey. If you're in an HOA, we can help coordinate approval for any changes that affect shared areas.
Are you fully insured for roofing work in Silverton?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance before we start any work on your Silverton property. This protects you and our crew in case of accidents or damage.
What maintenance does a metal roof need in Silverton's climate?
Metal roofs are low maintenance, but in our wet climate, we recommend annual inspections, especially after winter storms. Check for loose fasteners, debris in valleys, and any signs of sealant wear around flashing. Cleaning gutters regularly prevents water backup. We offer inspection and maintenance services to keep your roof in top shape and catch small issues before they become leaks.
Why choose us?

Trusted professionals in Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Salem

All your work handled by qualified professionals in Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

274+ Verified Client Reviews in Salem

⭐⭐⭐⭐⭐ 4.9/5 · 274 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Salem · Response within 24h · No commitment · ☎ (971) 273-5957

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm