Serving the Salem area  ·  (971) 273-5957  ·  Open Mon-Sun 7am-7pm
📞 (971) 273-5957 Free Quote

Metal Roofing in Aumsville, OR (97325) · Local Professionals

Salem Metal Roofing · Fast response in Aumsville and the Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+274Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Aumsville is a small town where most homes sit on generous lots, many with a shop or barn out back, and the roof takes a beating from wet winters, moss, and the occasional windstorm. The mix of older farmhouses, 1970s ranches, and newer builds along Main Street and around Aumsville Elementary means we see every kind of roof, from low-slope shingle to standing seam.

Homeowners in 97325 call Salem Metal Roofing because we know how to work around tight driveways, fruit trees, and the kind of weather that peels panels off a barn. We are based in Salem and have been serving Aumsville and the surrounding Marion County area for years, so we understand the local building department and what it takes to get a roof done right.

Metal Roofing in Aumsville (97325)

Aumsville sits on flat to gently rolling ground just east of Salem, with a lot of small farms, horse properties, and older homes that have been added onto over the years. That means we often find multiple roof layers, uneven decking, and gutters that have been patched a dozen times. The wet winters and shade from big Douglas firs and Oregon white oaks create perfect conditions for moss and algae, especially on north-facing slopes. We also see wind damage after winter storms, when limbs drop on roofs or fasteners back out of older panels. For farm buildings and shops, we recommend commercial-grade ribbed panels or standing seam that can handle snow load and heavy rain without ponding.

Our team has worked on everything from historic farmhouses near the Aumsville Historical Society to newer subdivision homes off Del Mar Drive. We know how to match existing profiles, handle retrofit over shingles when code allows, and coordinate with the city on permits for full replacements.

Our services in Aumsville

How a Job Works in Aumsville

Step 1: You call us at (971) 273-5957 or request a free estimate online. We schedule a time to come out and inspect your roof, attic, and gutters. We will check for leaks, moss, fastener condition, and flashing issues, and we will give you a written estimate with options. If it is a storm damage situation, we can often get out same or next day for an inspection.

Step 2: Once you approve the estimate, we pull the permit if required by the city of Aumsville and schedule the work. Most residential roofs take one to three days depending on size and complexity. We protect your landscaping, keep the driveway clear, and work around any HOA rules or historic district requirements. For farm buildings, we plan around your schedule and animals.

Step 3: After the job, we walk the roof with you, clean up every nail and scrap, and make sure your gutters are clear. We do not leave until you are satisfied and we have documented the work for your records.

Metal roofing in Aumsville is priced by the square foot, and the final cost depends on the material, roof pitch, access, and whether we are doing a repair or a full replacement. For a basic corrugated panel roof, you are looking at around $5.50 per square foot. Standing seam starts around $10 per square foot, and metal shingle or stone-coated steel runs about $9 per square foot. A typical ranch home with a simple gable roof might be $12,000 to $18,000 for a full replacement, while a farm shop or barn could be less per square foot due to simpler access. Repairs start at $450 for leak fixes, and screw replacement or re-fastening starts at $750. We always provide a free estimate and explain the options so you can choose what fits your budget. Call (971) 273-5957 to schedule.

Do you work on farm buildings and barns around Aumsville?
Yes, we do a lot of agricultural metal roofing in the Aumsville area. Barns, shops, and hay sheds often need heavier panels and fasteners that can handle wind and snow load. We can match existing colors and profiles and work around your animals and equipment schedule.
How fast can you respond to storm damage in Aumsville?
We offer free storm and wind damage inspections and aim to get out within 24 hours for emergencies. If a limb has punctured your roof or wind has peeled back panels, call us at (971) 273-5957 and we will tarp it if needed and schedule the repair.
What is the typical cost for a metal roof replacement on a 1,500 square foot home in Aumsville?
For a 1,500 square foot ranch with a simple roof, a metal roof replacement typically runs between $9,000 and $15,000 depending on the material and whether we remove the old shingles. Standing seam is on the higher end, corrugated panels on the lower end. We give you a detailed estimate after inspecting the roof.
Do I need a permit for a metal roof in Aumsville?
Yes, most full roof replacements and re-roofs require a permit from the city of Aumsville. The rules can vary, so we always check with the local building department before starting work. We handle the permit application and inspections for you.
What if my neighbor's tree hangs over my roof or there is a property line issue?
We can trim back branches that are touching your roof as part of the job, but we always recommend talking to your neighbor first if the tree is on their property. For property line disputes, we stay out of legal matters but can suggest a surveyor if needed. If your HOA has rules about roof color or style, we can help you get approval before ordering materials.
Are you fully insured for work in Aumsville?
Yes, Salem Metal Roofing is fully insured with general liability and workers' compensation coverage.
How often should I clean moss off my metal roof in Aumsville?
Because of our wet winters and shade trees, we recommend checking your roof every spring for moss and debris. A light cleaning and trim of overhanging branches can prevent moss from taking hold. We also offer metal roof coating and painting to protect the finish and extend the life of your roof.
Why choose us?

Trusted professionals in Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Salem

All your work handled by qualified professionals in Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

274+ Verified Client Reviews in Salem

⭐⭐⭐⭐⭐ 4.9/5 · 274 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Salem · Response within 24h · No commitment · ☎ (971) 273-5957

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm