Serving the Salem area  ·  (971) 273-5957  ·  Open Mon-Sun 7am-7pm
📞 (971) 273-5957 Free Quote

Metal Roofing in Lafayette, OR (97127) · Local Professionals

Salem Metal Roofing · Fast response in Lafayette and the Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+274Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lafayette is a small town where the old and the new sit side by side: vintage homes near the four-way stop at 99W and School Street, newer builds tucked into the hills, and vineyard properties spreading toward the Eola Hills. The mix of steep gables, low-slope ranches, and rural outbuildings means roofing here is never one-size-fits-all.

Homeowners in Lafayette (97127) call Salem Metal Roofing because we understand the local climate: wet winters that test every fastener, summer sun that bakes shingles, and wind that funnels through the valley. We are based in Salem, just a short drive away, and we know the specific challenges of roofing in Yamhill County.

Metal Roofing in Lafayette (97127)

Lafayette’s terrain ranges from flat lots near the downtown core to sloped properties on the edges of town, where runoff and drainage can be tricky. Many homes sit on older lots with mature trees that drop needles and leaves, clogging gutters and trapping moisture against roofing. The soil here is a mix of clay and loam, so proper site drainage and roof pitch matter. We also see a lot of older homes with multiple roof layers, which can limit retrofit options. Our team assesses each property individually, checking decking condition, flashing details, and ventilation before recommending a solution.

We have worked on everything from historic Victorians near the Lafayette School District to modern farmhouses and vineyard estates. Our experience with standing seam, metal shingles, and stone-coated steel means we can match the right material to your home’s style and your budget.

Our services in Lafayette

How a Job Works in Lafayette

Step 1: Call us at (971) 273-5957 or request a free estimate online. We will schedule a time to inspect your roof, discuss your goals, and provide a detailed written proposal. We will also check for any permit requirements with the city of Lafayette.

Step 2: Once you approve the proposal, we order materials and schedule the work. For homes in tight downtown lots, we plan delivery and staging carefully to avoid disrupting neighbors. If your home is in a historic district or HOA, we can help coordinate color and profile approvals.

Step 3: After installation, we clean the site thoroughly, haul away all debris, and walk you through the finished roof. We do not consider the job done until you are satisfied.

Pricing for metal roofing in Lafayette depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof over shingles at $7. Repairs start at $450, and screw replacement at $750. We provide free estimates so you can get an accurate number for your specific project. Call (971) 273-5957 to schedule yours.

My house is near the Lafayette Community Garden and has a steep pitch with old growth trees around it. What roofing material works best?
Steep pitches with tree cover are common in Lafayette. We often recommend standing seam metal roofing because its smooth surface sheds debris and resists moss. We also install leaf guards on gutters to keep needles and leaves out. Our team can evaluate your roof’s ventilation and suggest the best profile for your home’s style.
A windstorm just lifted some panels on my roof. Can you respond quickly?
Yes. Storm and wind damage repair is one of our specialties. We offer free inspections and can tarp or secure your roof to prevent further damage. Call us at (971) 273-5957, and we will schedule a prompt visit to assess and repair the damage.
What does a typical metal roof replacement cost in Lafayette?
Most replacements fall between $9 and $12 per square foot, depending on the material and roof complexity. For a standard 1,500 square foot roof, you might expect $13,500 to $18,000. We provide free estimates so you can get a precise quote for your home.
Do I need a permit to replace my roof in Lafayette?
Yes, roofing permits are typically required for replacements in Lafayette. The city follows Oregon building codes, and requirements can vary based on the scope of work. We handle the permit application process for you and ensure all inspections are passed.
My neighbor and I share a property line, and I’m worried about my new roof’s overhang. What should I do?
Property line disputes are best resolved before work begins. We can review your survey and adjust the design to stay within your property. If you are in an HOA, we can also help you get approval for the roof profile and color.
Are you fully insured for roofing work in Lafayette?
Yes, we carry general liability insurance and workers’ compensation coverage.
How often should I have my metal roof inspected in Lafayette?
We recommend an inspection every two to three years, especially after severe weather. Lafayette’s wet winters and summer sun can cause fasteners to loosen and seals to degrade. Regular maintenance extends the life of your roof and prevents costly leaks.
Why choose us?

Trusted professionals in Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Salem

All your work handled by qualified professionals in Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

274+ Verified Client Reviews in Salem

⭐⭐⭐⭐⭐ 4.9/5 · 274 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Salem · Response within 24h · No commitment · ☎ (971) 273-5957

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm