Serving the Salem area  ·  (971) 273-5957  ·  Open Mon-Sun 7am-7pm
📞 (971) 273-5957 Free Quote

Metal Roofing in Keizer, OR (97303) · Local Professionals

Salem Metal Roofing · Fast response in Keizer and the Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+274Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Keizer is a town of practical, hardworking homes, and most of them are showing their age up top. The 1960s to 1990s ranches and subdivision houses that line streets off River Road and around Keizer Rapids Park were built with low-pitch composition shingles, and after decades of wet winters, moss has moved in and the shingles are tired.

That is where we come in. Salem Metal Roofing has been helping Keizer homeowners at ZIP 97303 trade those worn shingles for metal that sheds moss, handles fir needles, and holds up to the windstorms that roll through the Willamette Valley. We are based just down the road in Salem, so when you call, you get a local crew that knows the difference between a Keizer ranch and a South Salem split-level.

Metal Roofing in Keizer (97303)

Keizer lots are mostly flat and rectangular, which sounds simple until you factor in the mature Douglas firs and bigleaf maples that hang over half the driveways in town. Those trees drop needles and leaves year-round, and on a shaded north-facing roof, that debris holds moisture and feeds moss. We see it constantly on the older ranches near Claggett Creek and in the neighborhoods off Lockhaven Drive. The other local wrinkle is wind: the same open stretches that make Keizer feel spacious also let gusts get under lifted shingle edges and, on older roofs, work fasteners loose. Metal roofing solves both problems. It sheds debris, resists moss, and locks down tight when the wind picks up.

Our team has installed, repaired, and replaced metal roofs across Keizer and the surrounding Salem area, from simple corrugated panel retrofits over existing shingles to standing seam systems on newer two-story homes. We know the local building department, we know what passes inspection here, and we know how to work around the tight side yards and mature landscaping that come with Keizer properties.

Our services in Keizer

How a Job Works in Keizer

Step 1: You call us at (971) 273-5957 or request a free estimate online. We schedule an on-site assessment at your Keizer home, walk the roof, check the decking and flashing, and talk through whether a metal roof over shingles or a full replacement makes more sense for your house. You get a written estimate with no pressure.

Step 2: Once you approve, we pull the required permits with the City of Keizer and schedule the work. On tighter lots, we plan material staging carefully so we are not blocking your neighbor's driveway or trampling the garden. If your home is in an HOA, we help you get the panel profile and color approved before we order materials. Most residential roofs take a few days to a week, depending on weather and complexity.

Step 3: We clean up every day and do a final walkthrough with you when the job is done. Magnets sweep the yard for screws and metal scraps, gutters get checked, and we make sure you know how the new roof works and what to expect. We leave your property clean and your roof ready for the next Oregon winter.

Pricing in Keizer depends on the size and pitch of your roof, how many layers of old shingles are up there, and how easy it is to access the property. As a ballpark, metal roof over shingles (retrofit) starts around $7 per square foot, corrugated and ribbed panel roofing starts at $5.50 per square foot, and standing seam starts at $10 per square foot. A full metal roof replacement typically starts around $9 per square foot. Smaller jobs like leak repairs start at $450, and screw replacement or re-fastening starts at $750. We always provide a free estimate so you know exactly what your Keizer project will cost before any work begins. Call (971) 273-5957 to schedule yours.

My 1970s ranch near Keizer Rapids Park has moss all over the north side of the roof. Can metal roofing stop that?
Yes. Moss needs a porous surface to grab onto, and bare metal does not give it one. We install metal panels with a factory finish that sheds water and debris, so moss and algae have a much harder time taking hold. On shaded Keizer roofs under big firs, this is one of the biggest reasons homeowners switch to metal.
A windstorm just peeled back part of my roof near Lockhaven Drive. How fast can you get out there?
We treat storm damage as a priority. Call us at (971) 273-5957 and we will schedule a free inspection as quickly as possible. If there is an active leak or exposed decking, we can often tarp the area to prevent further damage while we prepare a repair estimate.
What does a typical metal roof over shingles cost for a Keizer ranch home?
Most Keizer ranches fall in the $7 to $10 per square foot range for a retrofit over existing shingles, depending on roof size, pitch, and how many layers are already there. That covers materials and labor. We give you a firm written estimate after a free on-site assessment, so there are no surprises.
Do I need a permit from the City of Keizer for a metal roof replacement?
In most cases, yes. A full replacement or re-roof typically requires a permit, and the rules on how many existing shingle layers you can cover over are set by code. We handle the permitting process for you and make sure the work meets current requirements. Requirements can change, so we always confirm with the local building department before starting.
My HOA has rules about roof colors. Can you help me get approval for a metal roof?
We can. Many Keizer HOAs have design guidelines for roof profile and color, and we help you submit the right product information for approval before we order materials. If there is a question about where your property line sits relative to a neighbor, we recommend confirming with a surveyor, but we are happy to coordinate access and staging so the job goes smoothly.
Are you fully insured for work on my Keizer property?
Yes. We carry general liability insurance and workers' compensation coverage for our crew. We are happy to provide proof of insurance before work begins so you have peace of mind.
What maintenance does a metal roof need in Keizer's climate?
Not much, but a little goes a long way. Keep gutters clear of fir needles and maple leaves, especially in fall and early winter. Twice a year, check that no branches are rubbing the panels and that snow guards are secure if you have them. We offer free roof inspections if you want a professional eye on things before the rainy season starts.
Why choose us?

Trusted professionals in Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Salem

All your work handled by qualified professionals in Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

274+ Verified Client Reviews in Salem

⭐⭐⭐⭐⭐ 4.9/5 · 274 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Salem · Response within 24h · No commitment · ☎ (971) 273-5957

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm