Metal roofing prices in Salem vary based on factors like roof size, material type, and complexity of the project. Whether you need installation, repair, or replacement, understanding these factors helps you budget with confidence.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Salem and the mid-Willamette Valley: panel systems engineered for long wet winters, moss and dry summer sun, installed over high-temperature synthetic underlayment with proper ventilation and careful flashing details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Salem homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as rain-soaked wood decking swells and dries through the seasons. Superior wind resistance and a durable low-gloss finish. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of moss-covered composition shingle, worn cedar shake or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Some insurers offer discounts for impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles, with no tear-off, less waste and lower cost. Popular on Salem mid-century ranch homes. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing limb-dented, loosened or damaged panels, resealing seams and penetrations, and fixing failed flashing before winter rain becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and chimney and dormer transitions) and fixed right, not just caulked over. Emergency tarping available after winter windstorms. |
| Screw Replacement & Re-Fastening | From $750 | Salem's wet winters and dry summers swell and shrink roof decking and expand and contract metal roofs through the year, so screws back out and aged washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for homes, carports, barns and workshops across Marion and Polk counties. Quality panels in low-glare earth-tone colors, installed with proper screw patterns and closures that keep out wind-driven rain and fir needles. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Salem homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for winter storms. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent wind and impact performance, Class A fire rating, and profiles that mimic the cedar shake and slate looks common on Salem homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and last a century in the damp Willamette Valley air. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of moss-streaked, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance protective coating systems that extend roof life 10-15 years, restore color and freshen curb appeal without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and siding transitions, the number one leak point on Salem roofs. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Retention guards and rail systems for steep metal roofs: rarely needed in Salem's mild winters, but useful above entries, walkways and decks where an occasional freezing-rain event or a slide of wet debris could shed off slick panels all at once. Honest guidance on whether yours needs them. |
| Storm & Wind Damage Repair | Free inspection | Repair of windstorm and falling-limb damage to metal roofing: thorough documentation with photos, honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and moss, UV and weather wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry heavy winter downpours away from siding and foundations, with details that handle fir needles, maple leaves and moss. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, hop and hazelnut farm buildings, wineries, churches, carports and light commercial buildings across Marion and Polk counties: from farm buildings in the Eola Hills and around Silverton to shops in Northgate and West Salem, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and pitch : Larger roofs and steeper pitches require more materials and labor, increasing the overall cost.
- Material type and gauge : Premium materials like copper or standing seam cost more than corrugated panels, and thicker gauges add durability but raise the price.
- Accessibility and roof complexity : Difficult access, multiple stories, or complex roof shapes (valleys, dormers) can increase labor time and cost.
- Additional services and repairs : Services like flashing repair, snow guards, or gutter installation add to the total, as does repairing underlying damage.
What's included
- Travel included across the Salem area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof's approximate square footage and material preference ready when you call. A Salem Metal Roofing estimate includes a detailed breakdown of materials, labor, and any additional services, with no hidden fees. Call (971) 273-5957 to schedule your free inspection and estimate.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary due to roof size, material choice, complexity, and additional services. For example, a simple corrugated panel roof may start at $5.50 per square foot, while copper roofing starts at $20 per square foot. Labor and accessibility also play a role.
Do you offer free estimates?
Yes, we provide free inspections and estimates for all services. Call (971) 273-5957 to schedule an appointment at your convenience.
What payment methods do you accept?
We accept cash, checks, and major credit cards. Financing options may be available; please ask for details when you call.