Serving the Salem area  ·  (971) 273-5957  ·  Open Mon-Sun 7am-7pm
📞 (971) 273-5957 Free Quote

Metal Roofing in Gervais, OR (97026) · Local Professionals

Salem Metal Roofing · Fast response in Gervais and the Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+274Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Gervais is a small farm town where the roofs take a beating from big trees and long wet winters. Most homes here are older farmhouses and modest ranches, with a few newer builds on the edges of town, and plenty of outbuildings, shops, and barns on larger lots. The mix of low-pitched composition roofs and aging metal panels means we see a lot of leaks, loose fasteners, and moss growth, especially on the north sides and under the shade of the big firs and oaks that line the streets near Gervais High School and the downtown core.

Homeowners in Gervais (97026) call Salem Metal Roofing because we understand the specific challenges here: winter windstorms that rattle older panels, fir needles that clog gutters and trap moisture, and the occasional ice dam at the eaves. We are based in Salem and serve Gervais and the surrounding areas, so we know the local building stock and the common failure points. Whether you need a repair on a farmhouse roof or a new standing seam roof on a shop, we can help. Call us at (971) 273-5957 for a free estimate.

Metal Roofing in Gervais (97026)

Gervais sits in the Willamette Valley, surrounded by farmland and dotted with mature trees. The terrain is mostly flat, but drainage can be an issue on older properties where gutters and downspouts have not been maintained. Many homes have low-pitched roofs that were originally shingled, and over time, those roofs have developed moss, algae, and rot. Metal roofing is a great fit here because it sheds debris, resists moss, and handles the freeze-thaw cycles we get in winter. We often recommend corrugated and ribbed panel roofing for farm buildings and shops because it is cost-effective and durable, and standing seam for homes where a cleaner look and better performance are desired. The tight lots in the older part of town can make access tricky, but we are used to working in close quarters and protecting landscaping.

Our team has been serving Gervais and the Salem area for years, and we have seen just about every roofing issue this climate can throw at a building. From leaky fasteners on an old barn to a full replacement on a ranch house, we handle it all. We are fully insured and committed to doing the job right.

Our services in Gervais

How a Job Works in Gervais

Step 1: You call us at (971) 273-5957 or fill out our contact form. We schedule a free on-site assessment at your convenience. We will inspect your roof, take measurements, and discuss your options. You will get a written estimate with clear pricing and a timeline.

Step 2: Once you approve the estimate, we pull the necessary permits from the city of Gervais (or the appropriate jurisdiction) and schedule the work. On the day of installation, our crew arrives early, protects your landscaping, and gets to work. We know that many homes in Gervais have narrow driveways or tight side yards, so we plan for that. If your property is in a historic district or has HOA requirements, we will help you navigate those as well.

Step 3: When the job is done, we clean up thoroughly, using magnets to pick up any stray screws or nails. We walk the roof with you to make sure you are satisfied, and we do not consider the job complete until you are happy. We leave your property clean and your new roof ready for the next storm.

Pricing for metal roofing in Gervais depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, corrugated and ribbed panel roofing starts at $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. Metal roof repair starts at $450, and leak repair also starts at $450. Screw replacement and re-fastening starts at $750. These are starting prices, and your actual cost will depend on factors like roof access, the number of layers to remove, and whether there is underlying damage. We provide free estimates, so call us at (971) 273-5957 to get a precise quote for your Gervais home or business.

My farmhouse near Gervais High School has an old corrugated metal roof with leaking screws. Can you repair it without replacing the whole roof?
Yes, we can often repair existing metal roofs by replacing the screws and sealing the holes. If the panels are still in good shape, a screw replacement and re-fastening service (starting at $750) can extend the life of your roof. We will inspect the roof to make sure there is no hidden rust or damage before recommending a repair.
A windstorm just blew some panels off my barn on the edge of Gervais. Do you offer emergency repairs?
We do handle storm and wind damage repair, and we offer free inspections for storm damage. Call us at (971) 273-5957, and we will schedule a visit as soon as possible. We can tarp or secure the area temporarily if needed and provide a permanent repair estimate.
What is the typical cost for a metal roof installation on a 1,500 square foot ranch house in Gervais?
For a 1,500 square foot ranch with a simple gable roof, corrugated panel roofing might start around $8,250 (at $5.50 per square foot), while standing seam could start around $15,000. These are rough estimates. Factors like roof pitch, removal of old shingles, and trim work will affect the final price. Call us for a free estimate.
Do I need a permit to replace my roof in Gervais, and can you help with that?
Yes, roofing permits are typically required for a full replacement or re-roof in Gervais. The exact requirements and fees are set by the city of Gervais building department, and we will handle the permit application for you as part of the job. We always defer to the local building department for the final say on rules.
My neighbor and I share a property line, and I want to replace my roof. What if the new roof overhangs the line?
Property line issues can be tricky. In Oregon, there are rules about encroachments, and it is best to check your property survey and possibly consult with your neighbor before starting work. If there is an HOA, they may also have rules about roof overhangs. We can help you understand the typical setbacks and coordinate with your neighbor if needed.
Are you fully insured for roofing work in Gervais?
Yes, we are fully insured, carrying both general liability and workers' compensation insurance. This protects you and your property in case of any accidents on the job.
How often should I clean my metal roof in Gervais to prevent moss and damage from fir needles?
We recommend cleaning your metal roof at least once a year, preferably in the fall after the leaves and needles have fallen. Gervais has many fir and oak trees, and debris can trap moisture and lead to moss growth or clogged gutters. A yearly inspection and cleaning can also catch loose fasteners early. We offer roof inspections and maintenance services.
Why choose us?

Trusted professionals in Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Salem

All your work handled by qualified professionals in Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

274+ Verified Client Reviews in Salem

⭐⭐⭐⭐⭐ 4.9/5 · 274 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Salem · Response within 24h · No commitment · ☎ (971) 273-5957

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm