Serving the Salem area  ·  (971) 273-5957  ·  Open Mon-Sun 7am-7pm
📞 (971) 273-5957 Free Quote

Metal Roofing in Salem, OR (97301) · Local Professionals

Salem Metal Roofing · Fast response in Salem and the Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+274Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Salem roofs take a beating. Between the Douglas firs dropping needles on Court-Chemeketa Victorians, the bigleaf maples shading Bush's Pasture Park bungalows, and the winter windstorms that send limbs onto low-slope ranches in Northgate and Morningside, your roof is working harder than most. We see it every day: moss creeping across shaded north slopes, fasteners backing out on older panels, and flashing gaps that only show up when the rain comes sideways.

Salem Metal Roofing is based right here in 97301, and we install, repair, and replace metal roofs for homeowners and property managers across Salem and the surrounding area. Whether you are in a 1920s Tudor on Fairmount Hill or a newer two-story in Sunnyslope, we know the local housing stock and the weather that wears it down. Call (971) 273-5957 for a free estimate.

Metal Roofing in Salem (97301)

Salem sits in the Willamette Valley below the Capitol dome, and the mix of housing here shapes every roofing job. On the historic streets of Gaiety Hill and Court-Chemeketa, steep gables and complex rooflines on Victorian and Queen Anne homes mean lots of valleys, flashing details, and tight ladder access. Around Bush's Pasture Park and Fairmount Hill, 1920s to 1940s bungalows and Tudors often have original skip sheathing and low eaves that need careful retrofit planning. Across Northgate, Morningside, Candalaria, and South Salem, the 1950s to 1970s ranches and split-levels have low-pitched composition roofs that are prime candidates for a metal roof over shingles, provided the existing layers and decking check out. Newer subdivisions in Sunnyslope, West Salem, and Keizer bring two-story homes with simple gable roofs and HOA design rules. Out in the Eola Hills, Silverton, and Stayton, farmhouses, barns, hop and hazelnut buildings, and vineyard estates need standing seam, corrugated panel, or stone-coated steel that can handle big temperature swings and debris from surrounding trees. The long wet winters, moss and algae on shaded roof planes, fir needles and maple leaves in gutters, occasional ice storms, and dry smoky summers with embers from the Cascades all influence which metal system we recommend and how we detail it. Our crews are fully insured and experienced with standing seam, metal shingle, stone-coated steel, and corrugated panels. We serve Salem and the surrounding area, including Marion and Polk County communities.

We have worked on roofs under the big Oregon white oaks along the streets near the Capitol, on hillside homes with steep driveways in West Salem, and on agricultural buildings where snow guards and ice protection matter. That local experience means fewer surprises when we open up a roof and find what is really underneath.

Our services in Salem

How a Job Works in Salem

Step 1: You call us at (971) 273-5957 or request a free on-site assessment. We walk the roof and the attic if accessible, check flashings, fasteners, decking, and drainage, and talk through what we see. You get a written estimate with options, whether that is a repair, a retrofit over existing shingles, or a full replacement. We also document storm damage for insurance claims if that is relevant, though coverage decisions are always up to your carrier.

Step 2: Once you approve, we schedule the work and pull the required roofing permit through the local building department. Salem rules vary by jurisdiction, so we verify what applies to your address before we start. On tight historic lots in Court-Chemeketa or Gaiety Hill, we plan material staging carefully to keep driveways and alleys clear. If your home is in a historic district or HOA, we help coordinate the design review so panel profile and color meet the rules. For farm and vineyard properties out toward the Eola Hills, we account for access and wind exposure.

Step 3: We clean up daily and do a final walkthrough with you. Magnets sweep the yard for screws and metal shavings, gutters are checked, and we make sure you know how the new roof drains and what maintenance it needs. We leave your property clean and stand behind the work.

Pricing in Salem depends on the size and pitch of your roof, how many layers are already there, access, decking condition, and whether you choose a basic corrugated panel or a premium standing seam or copper system. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Corrugated and ribbed panel roofing starts around $5.50, metal shingle and stone-coated steel around $9, and copper or specialty metal around $20. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, flashing, chimney, and skylight repair around $600, and snow guards and ice protection around $1,200. Gutters for metal roofs start around $9 per linear foot. We give free estimates and free inspections, so call (971) 273-5957 and we will put together a realistic number for your Salem property.

My 1940s bungalow near Bush's Pasture Park has moss on the north slope and original skip sheathing. Can you install a metal roof over that?
Yes, we see this a lot in the older neighborhoods around Bush's Pasture Park and Fairmount Hill. Skip sheathing can work for a retrofit, but we inspect it first for rot, loose boards, and spacing. If it is sound, we can often install a metal roof over shingles or add a solid deck depending on what the code and the panel manufacturer require. Moss on the north slope is common here because of our wet winters and shade from big maples, and metal roofs shed moss much better than composition.
A windstorm just dropped a fir limb on my roof in South Salem. How fast can you get out for storm damage?
We prioritize active leaks and storm damage. Call (971) 273-5957 and we will schedule a free inspection as quickly as we can, often same day or next day depending on the season. We can tarp or make temporary repairs to stop water intrusion, document the damage for your insurance claim, and then give you a written estimate for permanent repairs or replacement. We never promise coverage, but we do provide the documentation your adjuster will want.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Northgate or Morningside?
For a simple low-pitch ranch that size, a metal roof replacement often lands in the range of $9 to $14 per square foot installed, depending on panel type, decking condition, and how much flashing and trim is needed. A retrofit over existing shingles can be less, starting around $7 per square foot, if the existing layers and decking allow it. We give free estimates and will walk you through the variables so you can compare options.
Do I need a permit to replace my roof in Salem, and how does historic district review work?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds, fees, and inspection requirements vary by jurisdiction, so we verify with the local building department for your address before starting. If your home is in a historic district, design review can restrict panel profile and color. The City of Salem website is a good starting point for local rules, and we help coordinate the paperwork and HOA or historic review so the project stays on track.
My neighbor's tree drops limbs on my roof and my HOA has rules about roof color. Can you help with both?
We can help with the HOA side by providing color samples and specification sheets for approval before we order materials. For the tree issue, that is a property line and neighbor matter, but we can document damage and recommend gutter guards or snow guards where debris is a problem. If limbs are a recurring hazard, we can also suggest panel profiles and fastening details that hold up better in wind and impact.
Are you insured for work on my Salem property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Salem's climate, especially with all the fir needles and moss?
Metal roofs are low maintenance, but in Salem the big issue is debris. Fir needles and maple leaves collect in valleys and behind snow guards, and if they stay wet they hold moisture against the panel. We recommend clearing gutters and valleys at least twice a year, once in late fall after the leaves drop and once in spring. Check fasteners on older panels every few years, and keep an eye on shaded north slopes for moss or algae. A free inspection can catch small flashing or sealant issues before they become leaks.
Why choose us?

Trusted professionals in Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Salem

All your work handled by qualified professionals in Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

274+ Verified Client Reviews in Salem

⭐⭐⭐⭐⭐ 4.9/5 · 274 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Salem · Response within 24h · No commitment · ☎ (971) 273-5957

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm