Serving the Salem area  ·  (971) 273-5957  ·  Open Mon-Sun 7am-7pm
📞 (971) 273-5957 Free Quote

Metal Roofing in Woodburn, OR (97071) · Local Professionals

Salem Metal Roofing · Fast response in Woodburn and the Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+274Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Woodburn is a town of practical, hardworking properties, from the ranch homes and farm shops off Highway 214 to the older houses near the downtown core. The mix of low-pitched roofs and big, open lots means metal roofing is a natural fit here, especially when you want something that sheds moss and fir needles instead of holding onto them.

We are Salem Metal Roofing, and we serve Woodburn (97071) and the surrounding Marion County area. If you have looked up at your roof after a windstorm and seen a lifted panel or a pile of needles in the gutter, you are not alone. We are based in Salem, we know the drive up I-5, and we are fully insured with general liability and workers' compensation.

Metal Roofing in Woodburn (97071)

Woodburn sits in the Willamette Valley, and the local conditions shape every roof we install. The long wet winters and the big shade trees mean moss and algae love north-facing slopes, and fir needles and maple leaves fill gutters fast. On the ranch homes and farm buildings around Woodburn, many roofs are low-pitched and covered with older composition shingles that are near the end of their life. Those are prime candidates for a metal roof replacement or a retrofit over the existing shingles, which can save on tear-off and disposal. We also see a lot of shops and outbuildings where corrugated and ribbed panel roofing makes sense because it is straightforward, durable, and handles the wide temperature swings we get from cold winters to dry, smoky summers.

Our team has worked on properties across Woodburn and the Salem area, from the neighborhoods near the Woodburn Premium Outlets to the rural edges where farm buildings and vineyards need a roof that can take a hit from a falling limb. We know how to work around tight lot lines and how to coordinate with the local building department, because permit requirements for a full re-roof vary and we always verify the current rules before we start.

Our services in Woodburn

How a Job Works in Woodburn

Step 1: You call us at (971) 273-5957 or request a free estimate. We schedule an on-site assessment at your Woodburn property, look at the roof from the ground and on top, check the flashing, fasteners, and seams, and talk through what you are seeing. You get a clear written estimate with options, no pressure.

Step 2: Once you approve, we pull the permits if they are required and schedule the work. In Woodburn, that might mean planning around a tight driveway or a shop building that needs access from the side. We protect your landscaping, stage materials carefully, and keep the site secure. For a full replacement, we remove the old roofing and inspect the decking before installing the new metal roof. For a repair, we match the existing panel profile and color as closely as possible.

Step 3: When the work is done, we clean up thoroughly, including a magnet sweep for nails, and we walk the property with you. We do not leave until you have seen the finished roof, understand the warranty, and know how to reach us if anything comes up.

Pricing in Woodburn depends on the size and pitch of your roof, the condition of the decking, access, and how soon you need it done. As a ballpark, corrugated and ribbed panel roofing starts at $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. A metal roof over shingles (retrofit) starts at $7 per square foot, and a full replacement starts at $9 per square foot. Repairs like a leak fix or flashing repair start at $450, and screw replacement or re-fastening starts at $750. We give free estimates, so call (971) 273-5957 and we will give you a realistic number for your Woodburn property.

My Woodburn ranch home has a low-pitch roof with old shingles. Can you install metal over them?
Often, yes, as long as your existing shingles are in good shape and the local code allows it. Woodburn has many 1950s to 1970s ranch homes with low-slope roofs, and a retrofit over shingles can save you the cost of tear-off and disposal. We inspect the roof first to make sure the decking is sound and the flashing details will work with the new metal.
A windstorm just peeled back a panel on my shop roof in Woodburn. How fast can you get out?
We prioritize storm damage calls in Woodburn and the surrounding area. Call us at (971) 273-5957, and we will schedule an inspection as soon as possible, often within a day or two depending on the volume of calls. We can tarp or secure the area if there is an active leak, and then give you a repair estimate.
What does a typical metal roof replacement cost for a Woodburn house?
For a standard ranch home in Woodburn, a metal roof replacement often falls in the range of $9 to $14 per square foot installed, depending on the panel type, roof complexity, and whether we need to replace any decking. A simple corrugated panel roof on a shop or barn may be closer to $5.50 to $8 per square foot. We give free estimates so you get a number that fits your actual roof.
Do I need a permit to replace my roof in Woodburn?
In most cases, yes. A full roof replacement or re-roof typically requires a permit from the city or county, and the requirements can vary. We handle the permit process for you and make sure the work meets current codes. If your home is in a historic district or has HOA rules, there may be additional design review for panel profile and color, so we check that early.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What are the rules?
Property line and overhang rules can be tricky, and they vary by local ordinance and any recorded easements. We recommend checking with the city of Woodburn before work starts. If you have an HOA, we can help coordinate the approval for the roof color and style so there are no surprises with your neighbor or the board.
Are you insured for work on my Woodburn property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Woodburn's rainy climate?
Metal roofs are low maintenance, but in Woodburn you should keep gutters clear of fir needles and maple leaves, especially in the fall. Once a year, check for loose fasteners or debris on the roof, and rinse off any moss or algae that starts to grow on shaded north slopes. We offer inspections and maintenance plans if you would rather have us handle it.
Why choose us?

Trusted professionals in Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Salem

All your work handled by qualified professionals in Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

274+ Verified Client Reviews in Salem

⭐⭐⭐⭐⭐ 4.9/5 · 274 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Salem · Response within 24h · No commitment · ☎ (971) 273-5957

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm